$75.00
Maintenance-free bearing with a 1 3/4″ round center hole, for McFarlane machines. Sealed at the factory, no grease schedule. Cross-references dealer part 10601. Our standard-tier bearing at this fitment — for more lip seals, see our TillXtreme version of this same bearing.
This bearing carries the gang shaft on McFarlane machines with a 1 3/4″ round center hole. It’s sealed at the factory, so there’s no grease schedule — and a weak seal, not use, is generally what takes out a bearing that sits outside over the winter.
This is our standard maintenance-free line at this fitment — confirmed as the standard-tier match to our TillXtreme version of this same bearing: same size and center hole, more lip seals on the TillXtreme side for a bearing that holds up longer against moisture and dirt. If you’re searching by dealer part number, this one cross-references to 10601.
Most bearing failures don’t come from impact — they come from side load. A gang that wasn’t assembled square puts constant lateral pressure on the bearing regardless of seal count. Get the gang square before you torque it down.
In stock and ships fast from our Wisconsin warehouse — less time waiting on parts, more time in the field.
Not sure this is the right bearing for your machine? Call us at (920) 464-0779 — we’ll help confirm fitment before you order.
McFarlane machines with a 1 3/4″ round center hole. If you’re searching by dealer part number, it cross-references to 10601.
Lip seals. This standard bearing is sealed at the factory but runs fewer lip seals than the TillXtreme line. For a bearing that holds up longer sitting outside between seasons, see our TillXtreme version of this same bearing.
Side load, not impact. A gang that wasn’t assembled square puts constant lateral pressure on the bearing no matter how well it’s sealed. Get the gang square before you torque it down.
Rotate the gang by hand and check for play or tightness. Listen for grinding or squeaking. You can also feel for abnormal heat, similar to checking a trailer wheel bearing.
Call us at (920) 464-0779 or reach out through our Contact Us page — we’ll help make sure you get the correct part.
| Weight | 10.6 lbs |
|---|---|
| Dimensions | 9 × 6 × 3 in |
